Quality has always been our priority. Our products
are certified as per IS: 9537 (Part III) Standards. In order to assure best
quality, all the tests are conducted in house as per the Bureau Of Indian
Standards (BIS), on a regular basis. The following tests are conducted by
our qualified engineers, in a well equipped and certified Laboratory:
Marking Test
Marking parameters like manufacturer’s name,
nominal sizes, country of manufacture, strength & standard mark are
tested under this. Also a test for durability of marking is conducted
Dimension Test
The attributes tested in this are Maximum and
Minimum Outside and Inside Diameter, Length of conduit and uniformity of
wall thickness.
Construction Test
The requirements specified under this test are that
the inside and outside surface of conduit are reasonably smooth and free
from burrs, flash and similar defects; and the edges over which the
conductors or cables are likely to drawn does not damage the cable or
conductor.
Mechanical Property
The tests conducted for mechanical properties are
the bending test, compression test (during and after the load), Impact test
and Collapse test.
